The Celestron AstroMaster 130 EQ is a
big 5.1" (130mm) aperture equatorial reflector designed primarily to give
exceptional wide angle views of the faint fuzzies outside the solar system –
nebulas, galaxies, open star clusters, and more. It includes a right ascension
motor drive for no-hands tracking of celestial objects. The AstroMaster 130 EQ
is a surprising bargain when you consider the high level of performance and
features you get versus the low price you pay.
While the AstroMaster 130
excels at deep space views, it also will perform surprisingly well on the Moon,
planets, comets, and other objects inside the solar system by adding an optional
higher power eyepiece to increase the magnification. It will even work for
observing things on the ground, as it comes with a low power eyepiece that gives
upright images, unlike most reflectors that provide images that are upside down.
Its rugged and stable CG-3 equatorial mount has manual slow motion controls
in both axes. These let you easily locate solar system and deep space objects
and manually track them across the sky. The supplied motor drive allows
hands-free tracking that will let the whole family observe without having to
re-aim the scope each time a new family member or friend steps up to look
through the telescope. At only 25 lbs., it’s lightweight and compact enough to
fit in virtually any storage space, but it’s optically big enough to keep an
observer happy for years. At its very affordable price, the Astromaster 130 is a
bargain indeed.
This Telescope’s Optical System . . .
Reflector optical
tube: 130mm (5.1") aperture 650mm focal length f/5 focal ratio Newtonian
reflector. All-glass mirrors, coated with highly reflective aluminum and
overcoated with quartz for long life. There are no plastic optical components.
The 24" long aluminum optical tube has protective tube end rings. The reflector
design of the scope is totally free of the purple haze of spurious color visible
around the Moon and planets in lesser refractor scopes. Images are sharp and
clear. You can even collimate (align) both mirrors for the sharpest images. This
will have to be done only rarely, thanks to the special push/pull design of the
cell holding the primary mirror.
Rack and pinion focuser: The 1.25" focuser
has dual focusing knobs for precise image control with either hand. The large
focus knobs are easy to operate, even while wearing gloves or mittens in cold
weather.
Two eyepieces: You get a medium power 1.25" 10mm (65x) eyepiece and
a lower power 1.25" 20mm (32.5x) erect image eyepiece with a 1.5° field of view
(three times the diameter of the full Moon). The 32.5x erect image eyepiece lets
you use the 130EQ terrestrially, as its images are not upside down as they are
with most reflectors. However, the equatorial mount will make it difficult to
center and track objects on the ground. The erect image eyepiece will probably
serve you better for lunar observing, as it will show you a familiar image of
the Moon, oriented as you see it with your unaided eyes or binoculars. Both
eyepieces are of a higher quality optical design than you'll find in most other
telescopes in this price range. They have antireflection coatings on their lens
surfaces for sharp images and very good contrast. Instead of providing low
quality eyepieces that give unrealistically high (and generally unusable)
200-300x magnifications as most economy telescope manufacturers do, Celestron
has chosen to provide higher quality eyepieces with sensible powers you can use
and enjoy every time you take your AstroMaster 130 out to observe.
Finderscope: A non-magnifying red dot finder is permanently attached to the
side of the optical tube. The battery-operated red dot finder seems to project a
dot of red light on the sky or on the daytime landscape exactly where the
telescope is pointed. The red dot will help you center distant objects in the
telescope so you don’t have to search for them using the narrow eyepiece field
of view. Collimating knobs on the finder let you line up its red dot precisely
with the main telescope optics to make centering distant objects easy and
painless.
This Telescope’s Mount . . .
Equatorial mount: The scope’s sturdy CG-3 equatorial mount is designed for
astronomical observing. By aligning the mount on the north celestial pole, you
only need to turn one slow motion control knob to follow planets and stars as
they travel across the sky (or let the supplied battery-operated motor drive do
it for you automatically). Two counterweights on the opposite side of the mount
from the telescope tube balance the weight of the optical tube and make it easy
to move the scope effortlessly from one part of the sky to another. No tools are
required to adjust the position of the counterweights to quickly and precisely
balance the optical tube. A micrometer control lets you adjust the
altitude of the scope mount to match
your latitude for fast alignment on the north celestial pole with no tools
required.
Motor drive: A battery-operated motor drive makes following the
stars a no-hands operation. The drive is a single axis right ascension drive
motor only. It does not have drive corrector functions for long exposure
astrophotography. The drive has a variable speed control to match the differing
speeds at which the Moon, planets, Sun, and stars move across the sky. It also
has switch-controlled northern/southern hemisphere operation. The drive runs for
up to 40 hours from one 9 volt transistor radio battery (supplied), depending on
the air temperature (battery life is shorter when the temperatures are colder).
Your telescope can be manually moved to any part of the sky while the drive is
functioning by releasing the right ascension and declination locks and pushing
the telescope tube in the desired direction. However, the drive does not have a
built-in clutch, so the thumbscrew attaching the drive to the telescope must be
loosened if very precise centering and positioning is desired using the manual
slow motion controls.
Split Ring Optical Tube mount: The optical tube mounts
in hinged split rings that are attached to a dovetail bar that fits into a
quick-release dovetail groove on the top of the mount. Installing the optical
tube on the mount is quick and easy, even in the dark. The optical tube locks
securely in place with no tools needed.
Setting circles: Setting circles
(graduated scales marked in either hours and minutes or degrees) are provided in
both right ascension (the east/west position of objects in the sky measured in
hours and minutes) and declination (the north/south position measured in
degrees). These allow you to align the scope on the approximate position of an
object in the sky by using its r. a. and dec coordinates from a star chart or
atlas – before you search for it in the finderscope and eyepiece. Setting
circles can reduce the time it takes for you to find the fainter and more
difficult deep space objects.
Manual slow motion controls: There are two
slow motion control knobs conveniently positioned on the mount so they are easy
to reach while observing. One controls the scope’s motion in right ascension
(the east/west direction in the sky). Turning this knob enables you to follow
the motion of celestial objects as they travel from east to west across the sky
if you are not using the supplied battery-operated motor drive. The second
controls the scope’s motion in declination (the north/south direction in the
sky). Turning this knob enables you to correct for any north/south drift a
celestial object may take as it move
s across the sky, due to an improper alignment of the
scope on the north celestial pole when you first set it up. The two controls
combine to give you complete access to any part of the sky. They give you the
ability to star hop from a known object to any other object by using a star
chart. They let you center objects in the field of view, then track them
effortlessly with only an occasional quick turn of the r. a. knob. As mentioned
above, a motor drive is also provided for hands-free tracking of celestial
objects.
Tripod: The lightweight pre-assembled tripod has 1.25" diameter
stainless steel legs to provide a rigid and stable observing platform. It easily
adjusts in height with no tools needed. The no-tool lock knobs that adjust the
leg height of the tripod are on the inside of the legs so they won’t snag on
clothing in the dark, a thoughtful touch that’s sure to be appreciated. Spreader
bars lock the legs firmly open when the tripod is set up. The tripod includes a
convenient accessory tray that attaches to the spreader bars to hold your
eyepieces and accessories close at hand and up out of the dew-soaked grass.
Software: The scope comes with TheSky Level 1 sky-charting CD-ROM that has a
database of 10,000 stars and objects it can plot and display on your
Windows-based computer screen. That’s enough solar system and deep space detail
to keep you busy observing for years, yet not so much that you’re overwhelmed by
charts showing much more detail than your scope can usefully reveal. Custom sky
chart printing lets you print out eyepiece finder charts to use with your
telescope to help you locate and identify the planets and many famous and faint
deep space nebulas, galaxies, and star clusters by star-hopping from object to
object using your scope’s manual slow motion controls. There are 75 full color
images of well-known celestial objects to help you identify them through your
scope.
One year warranty: As an expression of Celestron’s confidence in the
quality of their products, the AstroMaster is protected by Celestron’s One-year
limited warranty against flaws in materials and workmanship.